Journal Paper

1. "optimizing pressure swirl injector design, A STUDY ON TRUMPET ANGLE ON SPRAY charactristics."
   ADEL MAKHDOUM, Seyed Mahdi Mirsajedi, vahid beykzadeh
   Journal of Advanced Research in Numerical Heat Transfer, Vol. 17, pp.17-32, 2025
2. "Three-dimensional analysis of pressure swirl injector based on trumpet effects and orifice length variations"
   ADEL MAKHDOUM, Seyed Mahdi Mirsajedi
   IRANIAN JOURNAL OF CHEMISTRY and CHEMICAL ENGINEERING-INTERNATIONAL ENGLISH EDITION, Vol. 44, pp.1250-1265, 2025
3. ""
   Aref Sohrabi shabjere, Seyed Mahdi Mirsajedi
   Journal of Applied Fluid Mechanics, Vol. 18, pp.1396-1411, 2025
4. "Towards Multidimensional Artificially Characteristic-Based Scheme for Incompressible Thermo-Fluid Problems"
   Alireza Khosroshahi, Seyed Esmaeel Razavi, Seyed Mahdi Mirsajedi
   Mechanika, Vol. 23, pp.826-834, 2017
5. "A Moving Mesh Method with Defining Deformable Layers"
   mohammad Mahdi Razzaghi, Seyed Mahdi Mirsajedi
   PROGRESS IN COMPUTATIONAL FLUID DYNAMICS, Vol. 17, pp.63-74, 2017
6. "A 3D moving mesh method for simulation of flow around a rotational body"
   Mohammad Mahdi Razzaghi, Seyed Mahdi Mirsajedi
   Journal of Applied Fluid Mechanics, Vol. 9, pp.1023-1034, 2016
7. "Experimental Investigation of Separation Control on a NACA0024 Airfoil Using Stationary and non-Stationary AC-Dielectric Barrier Discharge Plasma Actuator"
   Seyed Mahdi Mirsajedi
   Journal of Applied Fluid Mechanics, Vol. 9, pp.877-888, 2016
8. "Experimental investigation of why an AC dielectric barrier discharge plasma actuator is preferred to DC corona wind actuator in boundary layer flow control"
   , , Seyed Mahdi Mirsajedi,
   Journal of Applied Fluid Mechanics, Vol. 7, pp.525-534, 2014
9. "Evaluation of a Two-Dimensional Moving-Mesh Method for rigid body motions"
   Seyed Mahdi Mirsajedi
   AERONAUTICAL JOURNAL, Vol. 110, pp.429-438, 2006
10. "A multi zone moving mesh algorithm for simulation of flow around a rigid body with arbitrary motion"
    Seyed Mahdi Mirsajedi
    JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME, Vol. 128, pp.297-304, 2006
11. "Simulation of a Microturbine Combustion Chamber with Carbon- Free Fuels under Lean and Premixed Combustion Conditions"
    Aref Sohrabi shabjere, Seyed Mahdi Mirsajedi
    Vol. 9, pp.31-42, 2025
12. "Simulation of Microturbine Combustion Chamber Performance with Syngas: Analysis of Compositions Derived from Coal and Biomass"
    Aref Sohrabi shabjere, Seyed Mahdi Mirsajedi
    Vol. 18, pp.29-48, 2025
13. "3D Simulation of the Annular Combustion Chamber of a Micro - Turbine with Hydrogen - Methane Mixture and Partially Premixed Combustion Model"
    Aref Sohrabi shabjere, Seyed Mahdi Mirsajedi
    Vol. 24, pp.727-738, 2024
14. "3D simulation and study of biogas combustion in C30 microturbine annular combustion chamber"
    Aref Sohrabi shabjere, Seyed Mahdi Mirsajedi
    Vol. 17, pp.72-86, 2024
15. "Investigating the effect of changing the length of the blades of a low-swirl burner on the flow field in a premixed flame"
    Faraz Naseri pour toosi, Seyed Mahdi Mirsajedi
    Vol. 53, pp.49-57, 2024
16. "Investigating the effects of different blockages with the same blocking ratio in a low-swirl combustion"
    Faraz Naseri pour toosi, Seyed Mahdi Mirsajedi
    Vol. 16, pp.1-15, 2023
17. "Experimental Investigation of the Effects of Burner Nozzle LengthChanges on Combustion Characteristics of a Swirl Premixed Flame"
    Navid Heshmati, Seyed Mahdi Mirsajedi
    Vol. 20, pp.2509-2515, 2020
18. "Experimental study of the effects of low swirl injector blockage ratio on stability limits and combustion regimes of natural gas flame"
    Navid Heshmati, Seyed Mahdi Mirsajedi
    Vol. 13, pp.63-79, 2020
19. "Investigation of Axisymmetric AeroSpike Nozzle"
    Seyed Ali Seyed Jafari, Seyed Mahdi Mirsajedi, Alireza Karimshahian bidgoli
    Vol. 9, pp.177-189, 2019
20. "Multidimensional Characteristic Modeling of Combined Convection Flows"
    Alireza Khosroshahi, Seyed Esmaeel Razavi, Seyed Mahdi Mirsajedi
    Vol. 18, pp.523-533, 2018
21. "Perfect and selected cut cell algorithms for grain burn-back analysis according to level set method"
    Seyed Mahdi Mirsajedi, Nohammadmehdi Gheysari Najafabadi
    Vol. 12, pp.55-66, 2016
22. "Using marching cube algorithm for 3D grain burn-back analysis in Solid Rocket Motors based on level set method"
    Nohammadmehdi Gheysari Najafabadi, Seyed Mahdi Mirsajedi
    Vol. 14, pp.85-95, 2015
23. "Numerica simulation of grain burn-back based on second order level set method"
    Nohammadmehdi Gheysari Najafabadi, Seyed Mahdi Mirsajedi
    Journal of Space Science and Technology, Vol. 7, pp.23-31, 2014
24. ""
    Nohammadmehdi Gheysari Najafabadi, Seyed Mahdi Mirsajedi
    Vol. 8, pp.3-18, 2014
25. ""
    Seyed Mahdi Mirsajedi, Nohammadmehdi Gheysari Najafabadi
    Vol. 19, pp.57-68, 2013
26. ""
    , Seyed Mahdi Mirsajedi
    Journal of Space Science and Technology, Vol. 5, pp.69-74, 2012
27. ""
    , Seyed Mahdi Mirsajedi
    Vol. 14, pp.73-89, 2012
28. ""
    Seyed Mahdi Mirsajedi
    pp.13-24, 2011
29. ""
    Seyed Mahdi Mirsajedi
    Journal of Energetic Materials, Vol. 5, pp.19-30, 2010

Conference Paper

1. ""
   Faraz Naseri pour toosi, Seyed Mahdi Mirsajedi
   21st International Conference On Iranian Aerospace, 2023
2. ""
   Faraz Naseri pour toosi, Seyed Mahdi Mirsajedi
   21st International Conference On Iranian Aerospace, 2023
3. "1D and implicit numerical simulation of SRM internal ballistics according to 3D grain burn back"
   Leila Kazemi, Seyed Mahdi Mirsajedi
   The 19th International Conference of Iranian Aerospace Society, 2021
4. ""
   Vahid Qadiri, Seyed Mahdi Mirsajedi
   The 18th International Conference of Iranian Aerospace Society, 2020
5. ""
   Navid Heshmati, Seyed Mahdi Mirsajedi
   The 18th International Conference of Iranian Aerospace Society, 2020
6. ""
   Navid Heshmati, Seyed Mahdi Mirsajedi
   , 2019
7. ""
   Kaveh Ahmadzadeh, Seyed Mahdi Mirsajedi
   AERO2017, 2017
8. ""
   Kaveh Ahmadzadeh, Seyed Mahdi Mirsajedi
   AERO2017, 2017
9. ""
   Kaveh Ahmadzadeh, Seyed Mahdi Mirsajedi
   AERO2017, 2017
10. ""
    Meysam Mehrpour, Seyed Mahdi Mirsajedi, Kaveh Ahmadzadeh
    The 15thInternational Conference of Iranian Aerospace Society, 2016
11. ""
    Meysam Mehrpour, Seyed Mahdi Mirsajedi, Kaveh Ahmadzadeh
    The 15thInternational Conference of Iranian Aerospace Society, 2016
12. ""
    Seyed Mahdi Mirsajedi
    , 2015
13. ""
    Seyed Mahdi Mirsajedi
    , 2015
14. ""
    Seyed Mahdi Mirsajedi
    , 2015
15. ""
    Seyed Mahdi Mirsajedi
    , 2015
16. ""
    Seyed Mahdi Mirsajedi
    , 2014
17. ""
    Seyed Mahdi Mirsajedi
    , 2014
18. ""
    Seyed Mahdi Mirsajedi
    , 2014
19. ""
    Amin Abdollahi, Seyed Mahdi Mirsajedi, Nohammadmehdi Gheysari Najafabadi
    , 2014
20. ""
    Nohammadmehdi Gheysari Najafabadi, Seyed Mahdi Mirsajedi
    , 2014
21. ""
    Seyed Mahdi Mirsajedi,
    , 2014
22. ""
    Khadijeh Avatef Rostami, Seyed Mahdi Mirsajedi
    , 2014
23. ""
    Nohammadmehdi Gheysari Najafabadi, Seyed Mahdi Mirsajedi
    , 2013
24. ""
    Nohammadmehdi Gheysari Najafabadi, Seyed Mahdi Mirsajedi
    , 2013
25. ""
    Nohammadmehdi Gheysari Najafabadi, Seyed Mahdi Mirsajedi
    , 2013
26. ""
    Nohammadmehdi Gheysari Najafabadi, Seyed Mahdi Mirsajedi
    , 2013
27. ""
    Seyed Mahdi Mirsajedi
    , 2013
28. ""
    Nohammadmehdi Gheysari Najafabadi, Seyed Mahdi Mirsajedi
    , 2012
29. ""
    Seyed Mahdi Mirsajedi
    , 2012